Introduction
Startup 250:Users:Danny:Desktop:Operation manuals:line pumps:maverick
(P305):pHseriesINTRO.fm
Operation Manuall - SP 305
9
NOTE!
The information represented on the tag is
for illustration only. Check the tag on your
unit to obtain the specific numbers which
apply to your unit.
Main ID tag
The main ID tag contains model information, the serial
number, the year of manufacture, the weight of the
unit, the strokes per minute and material pressure, and
the hydraulic systems. The unit serial number is
stamped into the subframe immediately above or below
the ID tag (Figure 3).
If your ID tag is missing
If the tag has been removed from the unit and you must
have some information about it, read the main serial
number that is stamped into the steel subframe. The
serial number is located at the base of the tongue on the
right-hand side, as shown in Figure 2. When you find
the number, call Schwing America’s Service
Department for the information. The unit files are
arranged by this serial number, and we can find out
anything about the unit from the file that corresponds
to this number. New ID tags are available once we have
the unit serial number.
SUBSIDIARY OF
GmbH.
Herne / Germany
Phone: (02325) 7871
www.schwing.de
AMERICA INC.
5900 Centerville Rd
White Bear, MN 55127
Phone:
651-429-0999
www.schwing.com
MODEL
WEIGHT
Max. hyd.
pressure:
System
1
System
2
System
3
System
4
System
5
MAX.
YEAR
MATERIAL
PRESSURE
30301733F
SERIAL NO.
STROKES PER MINUTE
LBS.
This product is covered by one or more U.S. patents - see patent decal
SP 305 171530001 2009
625
2500 n/a n/a n/a n/a
403350
mavmainID.eps
1 7 1 5 3 0 0 0 1
Figure 3
Main ID Tag (for reference only)
To Next Page
Loading...
