INCU-SHAKE Compact Stackable shaking Incubator Manual V2023.1
1
TABLE OF CONTENTS
1. INTRODUCTION 3
2. SAFETY PRECAUTIONS 4
3. ENVIRONMENTAL REQUIREMENTS 6
4. TECHNICAL DATA 7
4.1 Dimensions 7
4.2 Standard Functions 8
4.2.1 Main Unit 8
4.2.2 Door 8
4.2.3 Inner Working Chamber 8
4.2.4 Shaking Control 9
4.2.5 Temperature Control 9
4.2.6 Control Electronics 9
4.2.7 Shaking Tray Operation 9
4.2.8 Specifications 10
5. Preparation and Start-up 11
5.1 Unpacking 11
5.2 Lifting / Handling 11
5.3 Leveling the Units 11
5.4 Preliminary Cleaning 12
5.5 Electrical 12
5.6 Connect the Power Supply 12
5.7 Installation of Flask Clamps (Applies P6040 predrilled tray) 12
5.8 Installation of Sticky Mat (Applies P6041 plain tray) 13
5.9 Operation of Shaking Diameter Adjustment 13
5.10 Extra For Refrigerated Units 15
5.11 Modbus TCP/IP Protocol (Option) 15
6. OPERATING THE UNIT 17
6.1 Home Page Summary 18
6.2 Set Menu Page Summary 20
6.3 FUNC Page Settings 21
6.3.1 Switch of Control Mode - Temperature & Speed 22
6.3.2 Switch of Keep Function-Temperature Holding Function 22
6.3.3 Switch of Control Mode- Photosynthetic Light (Option) 22
6.3.4 Switch of Photosynthetic Lighting Control Function (Option) 23
6.4 Operating Temperature and Speed System 23
6.4.1 Operating Under Fixed Value Control Mode 23
6.4.2 Operating Under Programmable Control Mode 25
To Next Page
Loading...