INCU-SHAKE Compact Stackable shaking Incubator Manual V2023.1
35
6.8.3 Set Operator Password (OP PW):
▪ To reset the Operator Password, enter “Set” Page, enter “Password” page
for password management
▪ Press “Password”, and enter the current Administrator Password (ADM
PW).
▪ If the password entered is invalid, the “NEW OP PW” and “NEW ADM PW”
will keep showing as “0”.
▪ If the password entered is correct, the “NEW OP PW” and “NEW ADM
PW” will show as the current passwords.
▪ Press the “NEW OP PW” to set the new Operator Password (4 digit), press
“OK” to save.
6.8.4 Set Administrator Password (ADM PW):
▪ Contact SciQuip or its authorized distributor for more information.
6.9 Setting Communication Address (Option)
The incubator is equipped with RS485 communication function for data logging.
To enable the function, make sure the connections between the incubator and
the communication kit is proper and secure. See individual setup manual for
detailed instructions.
Moreover, once the connection is done, communication address needs to be set
in the "PW/COM" page,
To Next Page
Loading...
Need help?
General