INCU-SHAKE Compact Stackable shaking Incubator Manual V2023.1
36
⚫ Press "SET" in the home page
⚫ Press "PW/COM" in the "SET" page to set the door locking function and
communication address for RS485 connection.
⚫ Press this button and enter the address of this unit for RS485 communication. The
address can be set as any number within the range of 1-250. Press "Ok" in the
keyboard to confirm and save the address.
6.10 Using USB Data Logging System
⚫ The incubator is equipped with USB interface data
logging system, which saves all the operational data
automatically into mobile drive, for example, USB
drive.
⚫ Plug a USB 2.0 mobile drive into the interface on the
side of the front door.
⚫ The red LED indicator shall light up during recognition
or while the data is being recorded. Do not unplug the
USB drive while the red LED indicator is on.
To Next Page
Loading...