INCU-SHAKE Compact Stackable shaking Incubator Manual V2023.1
30
To set the lighting outputs of under "Programmable" control mode,
⚫ Press "SET" in the home page.
⚫ Press "LIGHTS" in the "SET" page to start setting the photosynthetic lighting
system.
⚫ Switch the control mode to "PROG".
SEG—Segment No.
The function indicates the serial number of current segment. No setting required.
RAMP—Ramp Time
This function indicates the time duration required for light output to reach from current
actual value to the ramp end light output value. Use the keyboard to enter the ramp
time from 0-9999 mins.
RED—Ramp End Red Light Output button
This function indicates the ideal red light output for the system to reach for the
segment. Use the keyboard to enter the ramp end red light output from 0-100%.
To Next Page
Loading...