INCU-SHAKE Compact Stackable shaking Incubator Manual V2023.1
40
7.1 TEMP DEV—Alarm Deviation Temperature
This value determines the maximum deviation, measured in temperature (℃), which the
chamber is permitted above/below once the incubator reaches the specified set point before
an alarm condition is declared. Use the keyboard to enter and press “BACK” to confirm and
save.
7.2 SPEED DEV—Alarm Deviation Speed
This value determines the maximum deviation, measured in speed (rpm), which the shaking
is permitted above/below once the incubator reaches the specified set point before an alarm
condition is declared. Use the keyboard to enter and press “BACK” to confirm and save.
To Next Page
Loading...