EasyManua.ls Logo

SDMO R44C3 - Page 40

SDMO R44C3
204 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Checking the fuel filters
When handling fuel, make sure there are no open flames or other fire hazards near the engine. Wipe
off any spilled fuel completely.Spilled fuel can ignite and cause a fire.
Danger
Drain water for the fuel filter if the warning of water draining for fuel filter is occurred.
Place a drip tray under the drain hose.
Loosen the drain plug and drain water from the fuel filter.
Feed fuel by pushing down on the priming pump (about seven strokes) to facilitate draining.
After draining, tighten the drain plug securely.
After drain the fuel filter, bleed the fuel system.For bleeding air from fuel system.
For bleeding air from fuel system:
Loosen the air vent plug on the fuel filter about 1.5 turns.
Apply a cloth to the air vent plug.
Repeat pumping until the fuel flow from air vent plug becomes free of bubbles.
Tighten the air vent plug and clean.
38/202

Table of Contents

Related product manuals