Sea-doo Utopia - BRP International Limited Warranty

98
Parts covered for a Model Year 2005 Sea-Doo sport boat equipped
with 947 DI engines:
Parts covered for a Model Year 2005 Sea-Doo sport boat equipped
with 4-TEC
®
engines, 4-TEC SC engines and 4-TEC IC engines:
Air Lines Exhaust Manifold
Fuel Rail Coolant Temp. Sensor
Rave Valve Throttle Position Sensors
Reed Valve Ignition Coil
Tuned Pipe Manifold Temp. Sensor
High-Tension Ignition Wires Manifold Air Press. Sensor
Electrical Harness Crankshaft Posit. Sensor
Throttle Bodies Air Pressure Regulator
Exhaust Hoses Fuel Pressure Regulator
Fuel Lines Fuel Injectors
Water Regulator Electronic Control Module
Air Compressor Fuel Pump
Cylinder Head Air Injector
Detonation/Knock Sensor Spark Plugs
Intake Manifold
All emission component related gaskets;
Head, Base, Exhaust
Digital Linear Actuator
(low idle control)
All Fuel System Components
Throttle Position Sensor Spark Plugs
Intake Manifold Air Pressure Sensor Ignition Coils
Intake Manifold Air Temperature
Sensor
Piston and Rings
Engine Temperature Sensor Intake and Exhaust Valve Gear/Train
Knock Sensor Valves, Valve Guides and Valve Guide Sealing
Emission Control Unit Crankcase Ventilation Valve
Injectors Wire Harness and Connectors
Fuel Pressure Regulator Emission Related Seals, Gaskets and Hoses
Intake Manifold Exhaust Manifold
lmo2005-006a_1.book Page 98 Wednesday, July 7, 2004 1:06 PM