74
MAINTENANCE
Emission Component
Maintenance
Maintenance, replacement, or re-
pair of the emission control devices
and systems may be performed by
any marine SI (spark ignition) en-
gine repair establishment or individ-
ual.
Only perform servicing procedures
which are detailed in this guide. Fur-
ther assistance or information can
be obtained from your authorized
Sea-Doo sport boat dealer. In many
instances proper tools and training
are required for certain servicing or
repair procedures.
Maintain the boat and equipment in
top condition at all times. Adhere to
the prescribed maintenance sched-
ules. An annual inspection of the
boat is always a good recommenda-
tion to follow.
The bilge must be kept clean of oil,
water or other foreign materials.
Do not attempt to lift the boat with-
out special equipment and training.
The engine and the corresponding
components identified in this guide
should not be utilized on product(s)
other than for those they were de-
signed. Maintenance procedures and
specified tightening torque must be
strictly adhered to. Never attempt re-
pairs unless the appropriate tools are
available. Each boat is designed with
parts dimensioned in both the metric
and the imperial systems. When re-
placing fasteners, make sure to use
only those recommended by BRP. If
required, contact your authorized
Sea-Doo sport boat dealer for further
servicing information.
Operate your boat prudently and
have fun. Don’t forget that all per-
sons must assist other boaters in an
emergency.
Engine Emissions
Information
Manufacturer’s Responsibility
Beginning with 1999 model year en-
gines, manufacturers of marine en-
gines must determine the exhaust
emission levels for each engine horse-
power family and certify these engines
with the United States of America En-
vironmental Protection Agency (EPA).
An emissions control information la-
bel, showing emission levels and en-
gine specifications, must be placed on
each boat at the time of manufacture.
Dealer’s Responsibility
When performing service on all 1999
and more recent Sea-Doo sport boats
carrying an emissions control informa-
tion label, adjustments must be kept
within published factory specifications.
Replacement or repair of any emission
related component must be executed
in a manner that maintains emission
levels within the prescribed certifica-
tion standards.
Dealers are not to modify the engine
in any manner that would alter the
horsepower or allow emission levels
to exceed their predetermined factory
specifications.
Exceptions include manufacturer’s pre-
scribed changes, such as altitude ad-
justments for example.
Owner Responsibility
The owner/operator is required to have
engine maintenance performed to
maintain emission levels within pre-
scribed certification standards.
The owner/operator is not to, and should
not allow anyone to modify the engine
in any manner that would alter the
horsepower or allow emissions levels to
exceed their predetermined factory
specifications.
lmo2005-006a_1.book Page 74 Wednesday, July 7, 2004 1:06 PM
To Next Page
Loading...
Need help?
General
