EasyManua.ls Logo

Sea-doo Utopia - SPECIFICATIONS AND METRIC INFORMATION; Boat Specifications

Sea-doo Utopia
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
84
TYPICAL LIFT TAB
Detach shock end. Detach other side.
Block and leave engine cover lid open
slightly.
This will avoid engine compartment
condensation and possible corrosion.
Reattach shock ends to engine cover
lid before operating boat.
If the boat is to be stored outside, cover
it with a vented opaque tarpaulin to pre-
vent sun rays and grime from affecting
the plastic components, boat finish as
well as preventing dust accumulation.
CAUTION: Never leave the boat
stored in direct sunlight. UV radiation
will dull finishes. The boat must never
be left in water for storage. Make sure
to turn off main battery cut-off switch.
During storage, it is necessary to block
the wheels, unscrew the drain plugs
and raise the bow slightly with the trail-
er jack (if so equipped) so that the wa-
ter can flow out of the bilge. Ensure
the drain plugs are unobstructed.
F04LBHY
lmo2005-006a_1.book Page 84 Wednesday, July 7, 2004 1:06 PM

Table of Contents

Other manuals for Sea-doo Utopia

Related product manuals