Seg WI Line WIC1 User Manual

I> . Alarm IL1 [Operation / Status Display / I>]
Only available if:
• I> . De󰊟nition = Alarm•
Signal: Alarm due to a fault in phase L1
I> . Alarm IL2 [Operation / Status Display / I>]
Only available if:
• I> . De󰊟nition = Alarm•
Signal: Alarm due to a fault in phase L2
I> . Alarm IL3 [Operation / Status Display / I>]
Only available if:
• I> . De󰊟nition = Alarm•
Signal: Alarm due to a fault in phase L3
I> . Pickup IL1 [Operation / Status Display / I>]
Signal: Pickup in phase L1
I> . Pickup IL2 [Operation / Status Display / I>]
Signal: Pickup in phase L2
I> . Pickup IL3 [Operation / Status Display / I>]
Signal: Pickup in phase L3
I> . IH2 Blo [Operation / Status Display / I>]
Signal: Blocking the trip command by an inrush
38 WIC1 WIC1-1.0-EN-REF
7 Protection Parameter
7.7.4 I>: Signals (Output States)

Seg WI Line WIC1 Specifications

General

Brand	Seg
Model	WI Line WIC1
Category	Protection Device
Language	English