Seg WI Line WIC1 User Manual

I>> . Alarm IL1 [Operation / Status Display / I>>]
Only available if:
• I>> . De󰊟nition = Alarm•
Signal: Alarm due to a fault in phase L1
I>> . Alarm IL2 [Operation / Status Display / I>>]
Only available if:
• I>> . De󰊟nition = Alarm•
Signal: Alarm due to a fault in phase L2
I>> . Alarm IL3 [Operation / Status Display / I>>]
Only available if:
• I>> . De󰊟nition = Alarm•
Signal: Alarm due to a fault in phase L3
I>> . Pickup IL1 [Operation / Status Display / I>>]
Signal: Pickup in phase L1
I>> . Pickup IL2 [Operation / Status Display / I>>]
Signal: Pickup in phase L2
I>> . Pickup IL3 [Operation / Status Display / I>>]
Signal: Pickup in phase L3
I>> . IH2 Blo [Operation / Status Display / I>>]
Signal: Blocking the trip command by an inrush
42 WIC1 WIC1-1.0-EN-REF
7 Protection Parameter
7.8.4 I>>: Signals (Output States)

Seg WI Line WIC1 Specifications

General

Brand	Seg
Model	WI Line WIC1
Category	Protection Device
Language	English