Seg WI Line WIC1 User Manual

I>>> . Alarm IL1 [Operation / Status Display / I>>>]
Only available if:
• I>>> . De󰊟nition = Alarm•
Signal: Alarm due to a fault in phase L1
I>>> . Alarm IL2 [Operation / Status Display / I>>>]
Only available if:
• I>>> . De󰊟nition = Alarm•
Signal: Alarm due to a fault in phase L2
I>>> . Alarm IL3 [Operation / Status Display / I>>>]
Only available if:
• I>>> . De󰊟nition = Alarm•
Signal: Alarm due to a fault in phase L3
I>>> . Pickup IL1 [Operation / Status Display / I>>>]
Signal: Pickup in phase L1
I>>> . Pickup IL2 [Operation / Status Display / I>>>]
Signal: Pickup in phase L2
I>>> . Pickup IL3 [Operation / Status Display / I>>>]
Signal: Pickup in phase L3
I>>> . IH2 Blo [Operation / Status Display / I>>>]
Signal: Blocking the trip command by an inrush
46 WIC1 WIC1-1.0-EN-REF
7 Protection Parameter
7.9.4 I>>>: Signals (Output States)

Seg WI Line WIC1 Specifications

General

Brand	Seg
Model	WI Line WIC1
Category	Protection Device
Language	English