Seg WI Line WIC1 User Manual

Device planning
Selection list referenced by the following parameters:
• ╚═▷ TCM . Mode•
Device planning Description
“-” Do not use
use use
Device planning
Selection list referenced by the following parameters:
• ╚═▷ CBF . Mode•
Device planning Description
“-” Do not use
use use
De󰃰nition
If set to “Alarm”: The function operates as a supervision function, i.e. a fault generates
neither alarm nor trip, but an »Alarm« signal gets issued instead. If set to “Trip”: The
function operates as a protection function, i.e. trips the breaker in case of a fault.
Selection list referenced by the following parameters:
• ╚═▷ I> . De󰊟nition•
• ╚═▷ I>> . De󰊟nition•
• ╚═▷ I>>> . De󰊟nition•
•
╚═▷ IG> . De󰊟nition
•
• ╚═▷ IG>> . De󰊟nition•
• ╚═▷ I2/I1> . De󰊟nition•
• [ . . . ]•
De󰈛nition Description
Trip The function operates as a protection function, i.e. trips the breaker in case of a fault.
86 WIC1 WIC1-1.0-EN-REF
11 Selection Lists

Seg WI Line WIC1 Specifications

General

Brand	Seg
Model	WI Line WIC1
Category	Protection Device
Language	English