Sega Racing Classic - Operational Area Requirements

6
PRECAUTIONS REGARDING INSTALLATION LOCATION
2-2 OPERATION AREA
● Forsafeoperation,useandoperatethisproductinanareameasuringatleast
1.63 m (64.2 in) in width and 2.52 m (99.2 in) in depth. The area prescribed in
this
manualisabsolutelynecessary,forifoneshouldfalloverandhittheirhead
against something, there could be a serious accident.
● B
esuretoprovidesufcientspacespeciedinthismanual.Donotallowobjects
toblocktheventilationports.Itcancausegenerationofheatandare.
● SEGAshallnotbeheldresponsiblefordamageorcompensationfordamageto
athirdparty,resultingfromthefailuretoobservethisinstruction.
● Forthesakeofsafetyandworkability,theceilingwherethisproductisinstalled
must be at least 2.4 m (94.5 in) high. If the ceiling is not at least 2.4 m (94.5 in)
high,
exerciseduecautiontoavoidhittingtheceilingandlights.
●Theentrywayforthisproductshouldbe1.02m(40.2in)wideand1.97m(77.6in)
high. This product is separated into its main units when shipped. They contain
moving
parts,soavoidtiltingthemasmuchaspossible.Tiltingtheunitscould
result in damage or deformation to the parts, or misalignment of the parts, and
malfunction may occur.
●If
themachinedoesnottthroughtheentrywaytotheinstallationlocation,do
not disassemble it indiscriminately. Do not disassemble the machine in any way.
There could be electric shock, damage to parts, or faulty operation. Request work
from
theofceindicatedinthismanualorthepoint-of-purchase,orinquiresfor
details.
2
2.52 m (99.2 in)
Air vent 0.2 m (7.9 in)
1.62 m (63.8 in) 0.7 m (27.6 in)
0.15 m (5.9 in)
1.63 m
(64.2 in)
1.02 m
(40.2 in)
0.7 m (27.6 in) or more