Sega Racing Classic - RINGWIDE (GAME BOARD)

58
SHIFT LEVER
12-2 REPLACING MICROSWITCHES
1
Turn off the power switch of the cabinet.
2
Remove the 4 tamperproof screws, and remove the shift cover.
3
Remove the 2 screws and take off the upper door on the back of the cabinet. (See 10-2.)
4
Disconnect the connector farthest to the left when facing the
inside of the upper door. This is the shift lever connector.
12
Disconnect the connector.
SHIFT COVER
TAMPERPROOF SCREW (4), black
M4 x 12