73
FLUORESCENT LIGHT/OTHER LAMPS REPLACEMENT
16-1 BILLBOARD FLUORESCENT LIGHT
1
Turn the power off.
2
Fasten the billboard (acrylic board) in place
with 2 truss screws.
3
Remove the billboard so that it comes out diagonally upward.
4
Remove the 3 truss screws, take off the
transparent acrylic backboard, and replace the
uorescent lights.
FLUORESCENT LIGHT 20 W
TRUSS SCREW (2), black
M3 x 6
TRUSS SCREW (3), chrome
M4 x 12, large at washer used
To Next Page
Loading...
