23
ASSEMBLY AND INSTALLATION
(1) MONITOR TEST
In the SYSTEM TEST MODE menu, selecting MONITOR TEST allows the screen (on which the monitor is tested)
to be displayed.
Although the monitor adjustments have been made at the time of shipment from the factory, make needed by
watching the TEST MODE screen. If it is necessary, adjust the monitor by referring to Chapter 14.
(2) INPUT TEST
Selecting the INPUT TEST on the GAME TEST MODE menu screen (on which each switch is tested) to be
displayed. Press each switch. If the display beside each switch indicates “ON,” the switch and wiring connections
are satisfactory.
Turn the steering wheel and press the pedals. If the volume value changes smoothly, the volume and wiring
connections are satisfactory.
(3) OUTPUT TEST
Selecting the OUTPUT TEST on the GAME TEST MODE menu screen (on which each lamp is tested) to be
displayed. Make sure that the lamp lights up properly.
Select DRIVE BD TEST to display the screen for testing the steering wheel recoil mechanism. Check whether the
steering wheel recoil mechanism is working properly.
Perform the above inspections also at the time of monthly inspection.
To Next Page
Loading...
