How to Access the Adjustment Board
1
Turn off the power switch of the cabinet.
2
Remove the 2 truss screws and take off the upper door on the back side of the cabinet.
3
There is an adjustment board on the bottom of
the LCD monitor. A long wire is connected to
the adjustment board.
4
Take the adjustment board out from underneath the LCD, pull it in front of the monitor, and make
adjustments while watching the screen.
When taking out and replacing the adjustment board, be careful not to get the wires caught on anything,
pinch them, or otherwise damage them.
TRUSS SCREW (2), black
M4 x 30, w/at & spring washers, large at washer usedM4 x 30, w/at & spring washers, large at washer used
AJUSTMENT BOARD
To Next Page
Loading...
