107
MAINTENANCE
LUBRICATING OIL
Check and lubricate all components at the intervals listed in
the periodic maintenance chart. Items not listed in the chart
should be lubricated in the general lubrication interval. The
rocker arm is lubricated at the factory and does not require
additional lubrication. However, if these components are
heavily used, the user may perform additional lubrication as
required.
Project
Recommended
model
Capacity
Inspection
procedure
Engine oil 10W/40-SL 2.4L
Maintain level
in safe range on
dipstick
Front axle
gear oil
SAE 80W/90 280mL
Drive each
2000km(1200MI)
Kilometers.
Rear axle
gear oil
SAE 75W/90
or
SAE 80W/90
220mL
(
No
differential
)
260mL
(
With
differential
)
Coolant
Maintain the level
between the fill
lines.
Brake
fluid
DOT4
Maintain the level
between the fill
lines.
Suspension,
balance bar
grease
āā
Grease nozzle
( 3 Pump max)
per 500 mile.