160
MAINTENANCE
FUSE
All circuits on the ATV have fuses to protect electrical
equipment from damage caused by high current (short
circuit or overload).
If any of the electrical parts do not work, the fuse may have
blown. If this happens, check and replace the fuse if necessary.
You can consider electrical faults. First check whether
the fuse needs to be replaced, if it is found to have blown,
replace the blown fuse. There is a spare fuse in the fuse box.
Check all fuses for other possible causes. Replace all blown
fuses and check the working condition of components. All
fuses are concentrated in the fuse box. In the event of a
system failure, see "Fuse Distribution and Ampere rating"
for details of which fuses to check.
NOTICE
◆
Do not use a fuse above the rated ampere value or
replace it with anything else.
◆
Please use the same product.Never use wires for
fuses, even temporary replacements are not allowed.
◆
Do not modify fuses or fuse boxes.
To Next Page
Loading...
Need help?
General
