119
MAINTENANCE
1
Bolt M6*25*8
2
Strainer cover
3
O-rings seal
4
Strainer spring
5
Oil strainer
The oil filter can be checked after the oil is discharged. If
cleaning is needed, please take the following steps:
1. Remove 4 bolts with tools;
2. Remove the strainer cover, O-ring seal and strainer
spring in turn;
3. Take out the oil filter for cleaning;
4. The installation step is opposite to the removal step
Oil fi lter change
This procedure requires mechanical skill and professional
tools such as a torque wrench as well as a means for
disposing of the drained fluid. If you do not have the skills or
the tools, see your dealer.
Check the fluid recommendation table for capacities and
plug torques. Always change the oil filter at the same time
when changing the oil
To Next Page
Loading...
Need help?
General
