120
MAINTENANCE
1
Screw
2
Oil fi lter inspection cover
3
Oil fi lter
1. Remove the fixing screws of the filter inspection cover
and open the filter inspection cover
.
You can see the
black cover. The oil filter is located here. Put the towel
under the oil filter
2. Change a new O shape ring onto a new oil filter, inspect
and make sure the O shape ring is in good condition.
3. Remove the oil filter to be replaced by the tool
counterclockwise;
Rotate clockwise to install the new filter until the filter
gasket touches the sealing surface. Tighten the can.
To Next Page
Loading...
