110
MAINTENANCE
REMOVE FRONT PANEL REPAIR COVER
To remove the front repair cover, do as following:
The front panel maintenance cover is fast removable snap-
type installation, and you only need to lift the front of the
maintenance cover up by hand.
When lifting up the maintenance cover, do not force too
much, in order to avoid the maintenance cover and the
upper shelf support bar collision, damage the spray paint of
the maintenance cover.
Coolant adding mouth and fuse box are located under the
repair cover. Please refer to the repair cover folding and
unloading procedure in this section to add cooling aid or
replace the fuse.
To Next Page
Loading...
Need help?
General
