42
VEHICLE DEVICE
Shift institutions
Different operation modes correspond to different gear.
After selecting the gear, check the indicator light on the
instrument panel to ensure that the gear has been switched
to the desired position. See the table below for the tap
position description:
NOTICE
You need to step on the brake pedal when you change the
gear.
If you change the gear when the engine is in idle speed or
the vehicle is moving, it can cause transmission damage.
Please place the transmission in parking gear and lock the
parking brake when nobody drives the ATV.
L
Low speed
H
High speed
N
Neutral
R
Reverse
P
Parking
To Next Page
Loading...
Need help?
General
