165
MAINTENANCE
Fuse box replacement
To prevent an accidental short circuit, turn the ignition
switch to the (OFF) position and check or replace the fuse.
To check or replace the circuit fuse, pull out the old fuse
with a puller.
The fuse box cover is equipped with a puller. Using this tool
will help you take out the fuse;
The fuse box cover is fitted with a common fuse which can
be replaced.
1
Puller
2
Spare fuse
NOTICE
If a replacement fuse suitable for the circuit rating is not
available, install a lower rated fuse.
To Next Page
Loading...
Need help?
General
