82
OPERATION
pilot lights.
2. Place the transmission in PARK.
3. Turn the engine off.
4. Engage the parking brake (if equipped).
5. Slowly release the brake pedal and make sure the
transmission is in PARK before exiting the vehicle.
6. Remove the ignition key to prevent unauthorized use.
Break-in Guidelines
The engine needs 10 working hours or a 300km run-in
period.
During run-in:
◆
Avoid full throttle operation.
◆
Avoid pressing the accelerator pedal for more than 3/4
stroke.
◆
Avoid continuous acceleration.
The brake needs a 200km run-in period.
New brakes will not operate at their maximum efficiency
until the run-in period is over. Brake performance may be
compromised, so be careful.
NOTICE
During this period, avoid full-throttle stares, rapid
acceleration, and constant rpm operation.
To Next Page
Loading...
Need help?
General
