146
MAINTENANCE
Reinstall the new lamp into the new headlight assembly.
The installation procedure is opposite to the disassembly
procedure. After installation, turn on the headlight switch to
test whether the lamp is working properly.
Replace taillight/rear turn light
Procedures for changing taillights:
Remove rear light cover.
1. Unscrew the rear light holder.
2. Turn the bulb that needs to be replaced on the taillight
seat from left to right. When the limit bead at the end of
the bulb gets stuck in the limit slot of the lamp seat, the
damaged bulb can be taken out and replaced with a new
bulb with the same power.
3. Test whether the lamp works normally.
To Next Page
Loading...
Need help?
General
