148
MAINTENANCE
2. Measure the distance from the floor to the center of the
headlights and mark the walls at the same height.
3. Start the engine. Convert headlight switch to high beam.
4. Watch the headlights aim at the wall. The strongest
part of the headlight beam should be 2 inches, 5cm
below the mark on the corner. Measurement on the seat
includes weight of the driver.
Adjust the headlight beam upwards and downwards
To raise the headlight beam, turn the headlight adjusting
screw counterclockwise.
To lower the headlight beam, turn the headlight speed
adjustment screw clockwise.
1
Light adjusting screw
To Next Page
Loading...
Need help?
General
