39
VEHICLE DEVICE
Blue button
pressed
，
Yellow
button
pops up
4×4
locking
mode
When the two-four-wheel drive switch (4-wheel
drive switch) is pressed, the four-wheel drive lock
symbol "
" is displayed on the instrument. At
this time, the four-wheel drive lock is working in
the state of 4-wheel drive lock. The front wheel
has power output, the rear wheel has power
output, and the left and right tires of the front
wheel output the same speed and power. The
vehicle will in speed limitation and speed cannot
more than 30km/h, this mode is suitable for
vehicle in troubles.
Rear axle locking
Blue button
pops up
，
Red button
pops up
2 x 4
patterns
When the two-four-wheel drive switch is in the
two-wheel drive state, the whole vehicle is only
driven by the rear wheel, and the front wheel has
no power output. The meter shows the symbol "
" for the second drive. This mode is suitable
for vehicles driving on flat roads.
Blue button
pops up
，
Red button
pressed
4 x 4
patterns
When the two-four-wheel drive switch (4-wheel
drive switch) is pressed, the symbol " " of
4-wheel drive is displayed on the instrument. At
this time, the instrument is in the state of 4-wheel
drive, with power output of the front wheel and
power output of the rear wheel. This mode is
suitable for muddy conditions, mountainous
conditions and other bad road conditions.
Blue button
pops up
，
Yellow
button pops
up
4×4
locking
mode
When the two-four-wheel drive switch (4-wheel
drive switch) is pressed, the four-wheel drive lock
symbol "
" is displayed on the instrument. At
this time, the four-wheel drive lock is working in
the state of 4-wheel drive lock. The front wheel
has power output, the rear wheel has power
output, and the left and right tires of the rear
wheel output the same speed and power. The
vehicle will in speed limitation and speed cannot
more than 30km/h, this mode is suitable for
vehicle in troubles.
To Next Page
Loading...
Need help?
General
