EasyManua.ls Logo

SEH PS Series - Page 40

SEH PS Series
207 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Network Settings
Print Server User Manual Windows 35
The URL will only be accepted by browsers that support IPv6.
Which Types of IPv6
Addresses Are
Available?
There are different types of IPv6 addresses. The prefixes of the IPv6
addresses provide information about the IPv6 address types.
Unicast addresses can be routed globally. These addresses are
unique and therefore unambiguous. A packet that is sent to a
unicast address will only arrive to the interface that is assigned
to this address. Unicast addresses have the prefixes '2' or '3'.
Anycast addresses are assigned to more than one interface. This
means that a data packet that is sent to this address will arrive
at various devices. The syntax of anycast addresses is the same as
the one of unicast addresses. The difference is that anycast
addresses choose one interface out of many.
A packet that is dedicated to an anycast address arrives at the
nearest interface (in line with the router metrics). Anycast
addresses are only used by routers.
Multicast addresses allow you to send data packets to different
interfaces at the same time without a proportional increase of
the bandwidth. A multicast address can be recognized by the
prefix 'ff'.
What do you want
to do?
’Configuring IPv6 Settings via the Print Server Homepage’
35
’Configuring Logical Printers via the InterCon-NetTool’ 36
'View IPv6 status' 55
Configuring IPv6 Settings via the Print Server Homepage
Proceed as follows:
1. Start the Print Server Homepage.
2. Click Configuration – IPv6.
3. Configure the IPv6 parameters; see: Table 3
36
.
4. Click Save to confirm.
The settings are saved.

Table of Contents

Other manuals for SEH PS Series

Related product manuals