SEH PS Series - Page 49

Network Settings
Print Server User Manual Windows 44
administer print servers via email (see: 19) and to send printer
information via email (see: 77).
What Do You Want to
Do?
 ’Configuring POP3 via the Print Server Homepage’ 44
 ’Configuring POP3 via the InterCon-NetTool’ 45
 ’Configuring SMTP via the Printserver Homepage konfigurieren’
45
 ’Configuring SMTP via the InterCon-NetTool’ 47
 'View POP3/SMTP status'55
Configuring POP3 via the Print Server Homepage
Requirements
 The print server is set up as user with its own email address on a
POP3 server.
Proceed as follows:
1. Start the Printserver Homepage.
2. Select Configuration – Mail.
3. Configure the POP3 parameters; see: Table 7 44 .
4. Click Save to confirm.
 The settings are saved.
Table 7: POP3 Parameters
Parameters Description
POP3 Enables/disables the POP3 functionality.
Server name Defines the POP3 server via the IP address or the
host name.
The host name can only be used if a DNS server was
configured beforehand.
User name Defines the user name used by the print server to log
on to the POP3 server.
Security Defines the authentication method
(APOP/SSL/TLS).
Check mail every Defines the time interval (in minutes) for retrieving
emails from the POP3 server.