Section 9: General Repairs
Repair Instructions
2016 Bambi MAX Service Manual – Models 1518-3542 (Version E) 52
We Engineer Solutions
Section 9: General Repairs
Repair Instructions
Suspension Line Replacement
A suspension line should be replaced whenever it displays
noticeable kinking or fraying. Factory replacement lines come pre-
swaged with connection links to make replacing quick and easy.
To remove the connecting link (connecting the suspension line to the M-strap), follow these procedures.
Locate a metal bar with a 5/16" hole (or drill a 5/16" hole into any
metal bar). If you are unable to locate a metal bar, a wooden block
will work, however, make sure to drill the hole into the end grain.
Tools required. Pin locked in place.
To Next Page
Loading...
