SEI Industries BAMBI MAX User Manual

Section 9: General Repairs
Hot Air Gun Patching
2016 Bambi MAX Service Manual – Models 1518-3542 (Version E) 70
We Engineer Solutions
Hot Air Gun Patching
On most items, hot air gun patching is the preferred method because it provides the most durable, permanent
repair possible.
Tools and materials required:
• Patches
•
One plastic hand-held roller
•
One hot air gun, Steinel HL 1800 E or equivalent:
120 V-1500 W (800 to 1100 deg. F, 450 litres per min.)
• One wide surface nozzle
• Isopropyl alcohol
•Scissors
Warning
It is extremely dangerous to use a hot air gun in the presence of flammable fumes such as gasoline
or paint thinner. There is a high risk of explosion and/or burns.
Warning
Injury, especially to hands and fingers, can occur when using a hot air gun. Most welding will
occur at temperatures of 800-1000 degrees F. Wear gloves to protect skin from overheating,
burning and blistering.

SEI Industries BAMBI MAX Specifications

General

Brand	SEI Industries
Model	BAMBI MAX
Category	Control Unit
Language	English