Section 9: General Repairs
Temporary Repairs Using Glue
2016 Bambi MAX Service Manual – Models 1518-3542 (Version E) 69
We Engineer Solutions
3. Weigh down the patch. Place a plastic cover sheet over
the patch followed by a weight bag for 12 hours at room
temperature. Remove the weight bag and leave to dry
for 24 hours.
4. If the patch will be subjected to abrasion after 24 hours,
paint over the patch with glue. Painting the patch also
provides protection from ultra violet light and weather.
Allow the bond to harden for 24 hours at room
temperature before using the item.
To Next Page
Loading...
