-
11
-
Inserting (Replacing) dry batteries
①
Turn OFF (
【
】
) the power switch.
②
Remove the battery cover on the rear side of the
body.
③
Set four Size D batteries (LR20) in the battery case
according to the polarity indication inside the case.
④
Return the battery cover.
CAUTION
• When using the AC adapter, be sure to turn OFF
(
【
】
) the power switch.
• Do not use rechargeable batteries.
⑤
Make sure that the chart paper is not raised from the
drum and close both the rear chart holder (silver matal)
and the front chart holder (transparent plastic).
⑥
Turn the chart feed dial 2 or 3 times to make sure that
the chart paper is fed properly. At this time, check if the
chart paper is properly folded in the chart cassette.
⑦
Place the chart cassette in the body, fit the protrusions to
the grooves of the body and push it in the arrow direction
until it clicks in place. Make sure that it is fixed securely.
Chart holders
Chart paper
Drum
２、
Turn it 2 or 3 times.
Chart feed dial
Chart cassette
Protrusions
Battery cover
4 Size D batteries
Press
To Next Page
Loading...
