-
9
-
Be sure to check the following points when installing the
instrument.
• The inclination of the body should fall within +/- 10 de -
grees both against the horizontal and the vertical (when
hanged on the wall.)
• The instrument should always stand as shown in the fig -
ure. If laid down, it may not work normally.
• When hanging it on the wall, fix the two screws 230 mm /
9.06 in. apart from each other.
CAUTION
The instrument weighs 2.9 kg approx. (including bat-
teries.) When hanging it, be sure to use the wall and
screws strong enough to hold 10 kg weight.
Chapter 2. Installation
230
230mm/abt. 9.06 in.
Holes for hanging on wall
(example)
Material of screw: Steel
3mm (abt. 0.12 in.)
5mm (abt. 0.20 in.)
7mm (abt. 0.28 in.)
15mm (abt. 0.59 in.)
3mm Approx.
5mm Approx.
15mm Approx.
Wall
ø 5-7mm
ø 3mm
To Next Page
Loading...
