-
24
-
8-1. SD card recording cycle indicator
This displays the SD card recording cycle that is cur-
rently set.
8-2. Date indicator
This displays the current date.
Reference
・The year data is displayed as the last two digits.
This setting is valid for the year 2000 to 2099.
Leap years are automatically applied during this
year range.
8-3. Time indicator
This displays the current time.
The time data is displayed in 24-hour format.
The dot at the right side of the hour data blinks at
2-second cycles (1 second on, 1 second o).
8-4. Normal measurement screen
(SD card recordable days indicator)
This is displayed only when an SD card is inserted.
The SD card remaining space is displayed in the area
of the normal measurement screen that shows the
chart speed. The units are indicated by "M"for month,
"D" for day, and "h" for hour, and "m" for minute.
If the SD card remaining space becomes 0,
【
REMAIN
】
and
the number section of the SD card remaining space begins
to blink.
CAUTION
・If any of the various settings are changed, the alarm set-
tings are made, or the pen is changed, the normal mea-
surement screen returns to the chart speed screen. To
display the SD card remaining space, change the screen
again.
・The SD card remaining space is an estimated value only.
8-5.
Temperature recording range setting indicator
This is displayed only when a user-selected set-
ting has been designated (DIP switches 3 and 4
are set to ON, and the power is turned on). This
displays the currently-selected temperature re-
cording range setting.
8-6. Humidity recording range setting indicator
This is displayed only when a user-selected set-
ting has been designated (DIP switches 3 and 4
are set to ON, and the power is turned on). This
displays the currently-selected humidity record-
ing range setting.
SD card recording cycle
SD card recordable days
indicator
Central temperature
of the chart
Recording range
Central humidity
of the chart
Recording range
Year
DayMonth
Second
（
1 second on, 1 second o
）
MinuteHour
To Next Page
Loading...
