-
17
-
5-2.
Starting and Stopping Data Writing to SD Card
Insert the SD card and set the
【
SD Card Write
】
switch to ON.
The MEMORY indicator turns on, and writing to the SD
card is started. To stop data writing, set the [SD Card
Write] switch to OFF.
CAUTION
・The error 700 occurs if the 【SD Card Write】 switch is
set to ON without inserting an SD card.
・Set the write-protect tab on the SD card to OFF. If it
is left at ON, the error 702 occurs.
・
When the amount of available space on the SD card be-
comes 0, the error 704 occurs. Insert a new SD card.
・If the amount of available space on the SD card is 7
days or less, 【REMAIN】 blinks. Obtain a new SD card.
・Data is not saved to the SD card when the battery life
indicator is blinking.
・When the battery level indicator changes from fully lit
to flashing, or vice-versa, data may not be written to
the SD card in some cases. Please be aware that this
is not a malfunction.
・
When using with batteries, if the remaining battery level
becomes low, the battery level indicator may show an
extremely low level when the power is turned on or
when the pen is moved. In this case, a reset may be
applied, or writing to the SD card may not be performed.
Please be aware that this is not a malfunction.
5-3. Changing the SD Card Writing Interval
①
Pressing the
【
FUNCTION
】
key twice in the normal mea-
surementscreen shows
【
MODE
】
,
【
MEMORY
】
, and
【
IN-
TERVAL
】
, and the SD card writing interval begins to blink.
②
Use the
【▲】
and
【▼】
keys to select the SD card writing
interval, and then press the
【
ENTER
】
key to change the
indicator from blinking to fully lit and register the setting.
③
To return to the normal measurement screen, press the
【
FUNCTION
】
key.
CAUTION
・The maximum number of files that can be stored on a
single SD card is 512. This is equivalent to about 16
months of data.
・Note that the maximum number of files that can be
stored will be reduced if folders or files are created on
the SD card by a personal computer or other device
other than this instrument.
Reference
・
The available SD card record intervals and record times
are as shown below.
SD card record
intervals
SD card size
128MB
256
〜
2GB
1min 10months
16months
1.5min 14months
3min
16months
5min
6min
10min
12min
15min
30min
60min
・
The display returns to the measurement screen if no
operation is performed within one minute.
To Next Page
Loading...
