Sekonic ST-50M - Chapter 8. Display Indicators (ST-50 M Only)

- 23 -
Chapter 8. Display indicators (ST-50M only)
In the ST-50M, the
【▲】
and
【▼】
keys can be pressed from
the normal measurement screen to change the various dis-
play indicators.
Normal measurement
(chart speed screen)
Press【▼】key
Press【▲】key
Press【▼】key
Press【▲】key
Press【▼】key
Press【▲】key
Press【▼】key
Press【▲】key
Press【▼】key
Press【▲】key
Press【▼】key
Press【▲】key
Press【▼】key
Press【▲】key
SD card writing cycle indicator
Date indicator
Time indicator
Temperature recording range
setting indicator
2
Humidity recording range setting
indicator
2
Normal measurement screen
1
(SD card recordable days indicator)

1.This is displayed only when an SD card is inserted.

2.This is displayed only when a user-selected setting
has been designated (DIP switches 3 and 4 are set to
ON, and the power is turned on).
CAUTION
・The following operation can be performed only in the nor-
mal measurement screen.
- Registers the various settings ( 【FUNCTION】 Key)
- Setting Alarm ( 【ALARM】 Key)
- Marking function ( 【MARK】 Key)
- Indicating dew point temperature and absolute humidity
(【ENTER/DEW POINT/ABSOL. HUMINITY】 Key)
- Pen replacement mode ( 【▼】 + 【ENTER】 Key)