Sekonic ST-50M - Table of Contents; Check before Use

- 5 -
Check Before Use
This instrument has passed our severe inspection, however,
the following points should be confirmed before use:
①
Check the appearance of the instrument carefully to
make sure that the instrument is free from any damage.
②
Check if all accessories are provided as specified.
The detail of the accessories is as follows:
If you find anything damaged or missing, please contact
us or the distributor from whom you purchased the
instrument.
7
9
Contents
Safety Information
Check Before Use
Chapter 1. Machine Call-outs ................................ 7
Chapter 2. Installation............................................ 9
Chapter 3. Preparation for Measurement
■
Setting (Replacing) chart paper ......................... 10
■
Inserting (Replacing) dry batteries ..................... 11
■
Time to replace .................................................. 12
■
Setting (Replacing) recording pens ................... 12
■
Pen replacement mode...................................... 13
■
Connecting AC adapter...................................... 13
■
Connecting extension cable............................... 13
■
Inserting the SD card(ST-50M only) .................. 14
■
Removing the SD card(ST-50M only) ................ 14
Chapter 4. Basic Operation
4-1. To start and stop recording ................................ 15
4-2. To change chart speed ....................................... 15
4-3. To select Celsius or Fahrenheit .......................... 15
4-4. Power saving mode ........................................... 15
Chapter 5. SD Card Writing Function (ST-50M Only)
5-1. Setting temperature recording range ................. 16
5-2.
Starting and Stopping Data Writing to SD Card ..... 17
5-3. Changing the SD Card Writing Interval .............. 17
5-4. Changing the Date ............................................. 18
5-5. Changing the Time ............................................. 18
5-6. Initializing the SD Card ...................................... 19
Chapter 6. Setting Recordeing Range
6-1. Setting temperature recording range ................. 20
■
Setting range 0-50°C (30-130°F) ....................... 20
■
Setting recording range manually ...................... 20
6-2. Setting humidity recording range ....................... 21
* The life of the attached batteries may be shorter than
the specified period because they have already been
used for trials. We recommend using new ones (size
D, alkaline) when you operate the instrument for prac-
tical use.
No. Parts Names Q’ty Remarks
1 Temperature recording pen 1 Red
2 Humidity recording pen 1 Blue
3 Chart paper 1 Z-folded plain paper
4 Dry battery 4 Used for trial
5 Operation Manual 1