Selco M4200 - Cable Monitoring; Input Delay; LED Colour

M4200 - User manual
Revision: 07.03.2017 Page 28
Parameter
Command
Description
Cable monitoring
WRITE IN1 CABLE OFF
There is no monitoring of cable faults on Channel 1
WRITE IN2 CABLE OFF
There is no monitoring of cable faults on Channel 2
WRITE IN3 CABLE OFF
There is no monitoring of cable faults on Channel 3
WRITE IN4 CABLE OFF
There is no monitoring of cable faults on Channel 4
WRITE IN5 CABLE OFF
There is no monitoring of cable faults on Channel 5
WRITE IN6 CABLE OFF
There is no monitoring of cable faults on Channel 6
WRITE IN7 CABLE OFF
There is no monitoring of cable faults on Channel 7
WRITE IN8 CABLE OFF
There is no monitoring of cable faults on Channel 8
WRITE IN1 CABLE ON
Channel 1 gives alarm at cable fracture or short-circuit on input cable
WRITE IN2 CABLE ON
Channel 2 gives alarm at cable fracture or short-circuit on input cable
WRITE IN3 CABLE ON
Channel 3 gives alarm at cable fracture or short-circuit on input cable
WRITE IN4 CABLE ON
Channel 4 gives alarm at cable fracture or short-circuit on input cable
WRITE IN5 CABLE ON
Channel 5 gives alarm at cable fracture or short-circuit on input cable
WRITE IN6 CABLE ON
Channel 6 gives alarm at cable fracture or short-circuit on input cable
WRITE IN7 CABLE ON
Channel 7 gives alarm at cable fracture or short-circuit on input cable
WRITE IN8 CABLE ON
Channel 8 gives alarm at cable fracture or short-circuit on input cable
Input delay
WRITE IN1 DELAY 25MS
Channel 1 has a delay of 25ms. from input to respond
25ms - 999ms.
WRITE IN2 DELAY 25MS
Channel 2 has a delay of 25ms. from input to respond
are accepted
WRITE IN3 DELAY 25MS
Channel 3 has a delay of 25ms. from input to respond
values
WRITE IN4 DELAY 25MS
Channel 4 has a delay of 25ms. from input to respond
WRITE IN5 DELAY 25MS
Channel 5 has a delay of 25ms. from input to respond
WRITE IN6 DELAY 25MS
Channel 6 has a delay of 25ms. from input to respond
WRITE IN7 DELAY 25MS
Channel 7 has a delay of 25ms. from input to respond
WRITE IN8 DELAY 25MS
Channel 8 has a delay of 25ms. from input to respond
WRITE IN1 DELAY 1S
Channel 1 has a delay of 1sec. from input to respond
WRITE IN2 DELAY 1S
Channel 2 has a delay of 1sec. from input to respond
1s - 999s are
WRITE IN3 DELAY 1S
Channel 3 has a delay of 1sec. from input to respond
accepted values
WRITE IN4 DELAY 1S
Channel 4 has a delay of 1sec. from input to respond
WRITE IN5 DELAY 1S
Channel 5 has a delay of 1sec. from input to respond
WRITE IN6 DELAY 1S
Channel 6 has a delay of 1sec. from input to respond
WRITE IN7 DELAY 1S
Channel 7 has a delay of 1sec. from input to respond
WRITE IN8 DELAY 1S
Channel 8 has a delay of 1sec. from input to respond
LED colour
WRITE LED1 COLOR RED
The colour of the LED of channel 1 gives a red light
Red, green and
WRITE LED2 COLOR RED
The colour of the LED of channel 2 gives a red light
Yellow is possible
WRITE LED3 COLOR RED
The colour of the LED of channel 3 gives a red light
colours
WRITE LED4 COLOR RED
The colour of the LED of channel 4 gives a red light
WRITE LED5 COLOR RED
The colour of the LED of channel 5 gives a red light
RED, GREEN and
WRITE LED6 COLOR RED
The colour of the LED of channel 6 gives a red light
YELL are accepted
WRITE LED7 COLOR RED
The colour of the LED of channel 7 gives a red light
values
WRITE LED8 COLOR RED
The colour of the LED of channel 8 gives a red light