Sena 30K - Page 13

Helmet
Installation
Using the
Glued Surface
Mounting
Adapter
Switching the
Microphone
Earbuds
External Mesh
Intercom
Antenna
30K Motorcycle Bluetooth Communication System | 13
2. InstallIng the
headset on
Your helmet
MENU
2. Place the helmet speakers along with the hook
and loop fasteners, centered to your ear, in the
ear pockets of the helmet. If the helmet has deep
ear pockets, you can use the speaker pads to
place the speakers closer to your ears.
Clamp Unit
Allen Wrench
Fin
Hook FastenerFoam Speaker Cover
Note:
• The speaker with the shorter wire is for the left
ear and the speaker with the longer one is for
the right ear.
• To enhance the audio quality, you can make use
of the foam speaker covers. Cover each speaker
with the foam and attach the hook fastener at the
back of the speaker. Then place the speakers in
the helmet as described above. Foam covered
speakers work most effectively when they are
slightly touching your ears.
Clamp Unit
Allen Wrench
Fin
Hook Fastener
Foam Speaker Cover