Sena 30K - Glued Surface Mounting Adapter

Helmet
Installation
Using the
Glued Surface
Mounting
Adapter
Switching the
Microphone
Earbuds
External Mesh
Intercom
Antenna
30K Motorcycle Bluetooth Communication System | 15
2. InstallIng the
headset on
Your helmet
MENU
2.2 Using the Glued Surface Mounting
Adapter
If you have any problem equipping the clamp
unit on the helmet for any reason, you may use
the glued surface mounting adapter to attach the
clamp unit on the external surface of the helmet.
1. Remove the speaker unit.
1
2
1
2
2. Remove the back plate.
1
2
1
2
3. Remove the rubber pad and replace it with the
thicker rubber pad included in the package.
Clamp Unit
Allen Wrench
Fin
Hook FastenerFoam Speaker Cover
4. Hook on the adapter to the clamp unit then screw
in the glued external adapter to the clamp unit.