Sena 30K - Installing the Headset on Your Helmet; Helmet Clamp Installation

Helmet
Installation
Using the
Glued Surface
Mounting
Adapter
Switching the
Microphone
Earbuds
External Mesh
Intercom
Antenna
30K Motorcycle Bluetooth Communication System | 12
2. InstallIng the
headset on
Your helmet
MENU
2.1 Helmet Installation
To securely install the headset on the helmet,
please follow this procedure.
1. Insert the back plate of the clamp unit between
the internal padding and the external shell of the
helmet, and tighten the two screws.
Clamp Unit
Allen Wrench
Fin
Hook FastenerFoam Speaker Cover
Note: Depending on the size and shape of your
helmet, you may need to change the thickness of
the rubber pad between the clamp plates using
the two extra rubber pads in the box. To increase
the overall thickness, attach the thinner one to
the original rubber pad or replace the original
rubber pad with the thicker one.
Clamp Unit
Allen Wrench
Fin
Hook FastenerFoam Speaker Cover
2. INSTALLING ThE hEADSET ON
YOur hELmET