Sena 30K - Page 88

Pairing with
the Remote
Control
30K Motorcycle Bluetooth Communication System | 88
13. Remote ContRol
MENU
3. Enter pairing mode in the Remote Control
device. The headset will automatically connect
with the Remote Control device in pairing mode.
You will hear a voice prompt, “Remote control
connected”, when they are successfully paired.
1x
TAP
10s
HOLD
NAVIGATE
FORWARD
Enter Pairing Mode
on Remote Control.
Access Remote Control Pairing
in the Confi guration Menu
Enter Pairing Mode
REMOTE
CONTROL
EXECUTE
=
=
=
=
ACCESS
CONFIG.
MENU
“Confi guration menu”
“Remote control pairing”
“Remote control connected”
ROTATE
R
P