The Mako Shark blade like its namesake in the ocean, is known for its incredible speed. It is a segmented
turbo blade that cuts through all aggregates like brick, block, concrete with heavy reinforcement and just
about anything else you can get in to.
Like the real Mako Shark in the wild the Mako Blade can maintain optimum temperature in all kinds of
aggregates because of Sencore’s patented Six Oversized cooling holes, giving you the ability to cut either
wet or dry. We even added a pin hole so it can be mounted on most walk behind saws.
If you are looking for a versatile blade with incredible speed and life the Mako is the blade for you!
MAKO
DIAMOND BLADE
PART NUMBER DIAMETER THICKNESS ARBOR SEGMENT
SEN20MAKO-2 20” 0.125” 1” 10 MM SEGMENT
SEN18MAKO-2 18” 0.125” 1” 10 MM SEGMENT
SEN16MAKO-2 16” 0.125” 1” – 20MM 10 MM SEGMENT
SEN14MAKO-2 14” 0.125” 1” – 20MM 13 MM SEGMENT
SEN12MAKO-2 12” 0.125” 1” – 20MM 13 MM SEGMENT
MAKO
To Next Page
Loading...