Over the years one of the hottest selling blades in America has been the Hammerhead Blade. We’ve been very
proud of the overwhelming response we’ve received but decided it was time to go from good to great and now we
denitely feel we have.
We’ve increased the diamond concentration, giving it an amazing segment height of 13mm, which is one of the
industry’s highest, and added our trademark of 6 over-sized cooling holes to give the blade better cooling capacity.
We didn’t stop there, we gave the blade a thinner core, at only .118” thickness which added speed through the cut
and minimized the chipping as it cut some of the harder aggregates.
You won’t believe the value we packed into this blade. Concrete, brick, block, pavers, precast, blue stone, sandstone
you name it and it will cut it.
Dollar for Dollar this blade is the best in the market
HAMMERHEAD
DIAMOND BLADE
PART NUMBER DIAMETER THICKNESS ARBOR SEGMENT
SEN20HH-3 20” 0.125” 1” 10 MM SEGMENT
SEN18HH-3 18” 0.125” 1” 10 MM SEGMENT
SEN16HH-3 16” 0.125” 1” – 20MM 10 MM SEGMENT
SEN14HH-3 14” 0.125” 1” – 20MM 13 MM SEGMENT
SEN12HH-3 12” 0.125” 1” – 20MM 13 MM SEGMENT
HAMMERHEAD
To Next Page
Loading...