Advanced functionalities
Caution: Any change to the waypoints or their parameters are di-
rectly sent to the drone and may therefore impact its flight behaviour.
We recommend that you take great care before modifying waypoints
while the drone is in flight.
You can add new waypoints by clicking the button or by right-clicking on the
Map Area and selecting ‘Add waypoint here’. Clicking the button will remove
all mission waypoints from the drone.
Note: All modifications made to the waypoint list will be lost when
the drone is switched off, unless the list is explicitly saved into the au-
topilot using the ‘Save flight plan in drone’ button in the Setup Phase
tab (see Section ‘Setup Phase tab’ on page 96).
110
To Next Page
Loading...
