Maintenance, Repair and Troubleshooting
tween 3 and 4.2 V.
The charger delivered with your drone automatically checks for healthy voltages
of all three cells and only attempts charging if they are within limits. If the cells
are out of balance, the charger will take care of balancing them. If the charger
detects a voltage outside of the allowable range it will indicate an error either by
flashing the status LED red, or by the LED staying off. This means that the battery
is over-discharged and should be discarded.
Caution: The batteries delivered with your drone are designed to be
charged with the charger delivered with your eBee. senseFly Ltd can-
not be held responsible for any consequences resulting from using
a different charger. In particular, using a charger improperly config-
ured or designed for other types of batteries may lead the battery
pack to be permanently damaged or to catch on fire.
LiPo batteries do not exhibit any memory effect. We recommend that you always
fully charge them after use even when they are only partially discharged. When
not using the battery store it in the carrying case provided with your drone. Avoid
leaving the battery in direct sunlight.
Caution: If any of the cells of your battery pack are overly discharged
the battery may be irreversibly damaged and becomes dangerous to
charge. If the battery grows beyond its regular size or if any of the
cells are punctured it is also likely damaged and should be discarded.
Forcefully charging a damaged battery may lead it to take fire. Do
not attempt to charge an over-discharged or damaged battery.
Dispose of the battery safely.
136
To Next Page
Loading...
